3D Wheeler Aligner

Make : Manatec
Wheel alignment apparatus is part of standard automobile maintenance that consists of adjusting the angles of the wheels.

• Four compact measuring heads
• 6 CMOS cameras and 6 inclinometers
• Camera / Caster / Thrust Angle
• Front Setback / Thrust Angle
• Spoiler Program for all 4 wheels
• Wheel Rim Size 12" - 24"
• Excess Toe Warning
• Four point run out compression in single rotation
• Data Manager Software
• TFT Monitor

Car ECU Scanner

Make : Bosch
The Engine Analyzer Pro program by Performance Trends, Inc. is a software system to help professional engine builders, racers and engineers understand and predict many aspects of full power engine performance.

• Multi-meter with digital and graphical display.
• Engine Analyzer
• Mobility for Variable use
• Workshop - Friendly operating concept with dirt-repelling touch screen and function keys.
• Clear display on eight-inch screen.
• Ergonomic design, shockproof housing and lightweight.
• Possibility for testing sensors and electrical components.

Cam Tester

Cam angle and rpm tester is used to set the opening and closing time using cam.

Car AC Recycling Machine

Technical Specification:
Display					: 	LCD
Type of refrigerant			: 	R124a
Operating Process			: 	Fully Automatic/Manual
Refrigerant scale resolution 	: 	10 gms
Oil scale resolution			: 	5 gms
Filters					:  	2 filters for humidity
Vacuum pump				: 	170 liters/min.
Compressor				: 	21 cc , High pressure
Refrigerant Bottles			: 	40 liters , Refillable
Hoses					: 	6 meters
Working temperature		: 	11°C to 49°C.
Power supply				: 	220 -240 V , 50-60 Hz
Power 					: 	1100 W

Cylinder Pressure Gauge

Cylinder compression pressure gauge is used to measure cylinder pressure in petrol/diesel engine.

• Adapters for a wide number of vehicles (spark plug types/depths)
• Kit includes 2 rubber cones ends for quick check (no need to thread into head)
• 3" Gauge has dual color scale with 0-300 PSI, 0-20 kPa
• Fittings: M10, M12, M14, M18 (Male, With "O" Ring)
• Includes 14mm and 18mm spark plug adapters

Cylinder Reboring Machine

Cylinder Re-boring Machine is used to foi-boring or re-boring the cylinders of internal combustion engines.

• Boring capacity 35 - 65 mm
• Depth of boring 150 mm
• Spindle RPM 300
• Spindle feed 1 ¾
• Electric Motor ½ H.P
• Accessories
• Equipment box 1 No
• Micrometer tool 1 No
• Lapping fixture 1 No
• Lapping disc 1 No
• Tool holder with two cutter bits 1 set
• Guide 3 sets
• Clamping device 1 No
• Allen key 1 No
• Screw drivers 1 set

Diesel Fuel Inject or Pump Test bench

In this Equipment is used to Study of fuel injection calibration test bench with nozzle tester and also calibrate the injection parameters like injection timing, fuel amount, etc.

• Drive : Belt
• No. of Cylinder : Eight
• Electric Motor : 5 HP for main drive and 1HP for fuel supply pump
• Tachometer : Electronic automatic 100 - 1200 shots per minute
• Speed Range : 100 - 3000 RPM
• Phasing : High Pressure Phasing Standard
• Pressure Gauges : Two (for high pressure and fuel supply)
• Speed Control : Fully controllable from front side
• Color : An color on request
• Capacity : Inline, rotary and distributor pumps
• Gross weight : 700 kg approx

• Quick setting pump mounting stand 1
• Pump mounting brackets 2
• High pressure pipes A & B Type Eight each type
• Phasing Bar 1
• Flexible Fuel Feed Pipe 2
• Glass Test Tubes 0 -16, 0 -75 cc 1 set ( 8 pcs each)

Head Light Alligner

Head light Alignment Gauge is used to align the Head light in required angle.

Make	: 	Manatec

Techinical Specification
	
	Column height			:	1413 mm
	Lens diameter			:	200 mm
	Lens Type			:	Glass
	Leveling of HBT		:	Optical Visor with 3 wheels on top
	Optical box shape		:	Rectangular (Metallic)
	Rear Panel			:	Adjustable with calibrated wheel
	Lux Meter  			:	Analog or Digital
	Indication Available 		:	Lux valves at 25 m
	Dimension (H x B x L)	:	1535 x 630 x 630 mm
	Weight  				:	30 kg
	Measuring Range 		:	Min - 240 mm, max - 1280 mm
	Power Supply 			:	9V battery for digital type only
	Accuracy (Analog) 		:	 ± 10%
	Accuracy (Digital) 		: 	 ± 15% (15 - 32 Lux)
							 ± 10% (32 - 64 Lux)
							 ± 5% (64 - 240 Lux) 

Spark Plug Cleaner Tester

Techinical Specification
Working Pressure				:	5 - 12 Kgf/cm2
Spark Plug used				:	M10, M12, M14, M18
Input Voltage					:	220 V
Electronic Vibrator Voltage		:	220/12 V
Ignition Coil 					:	12/12 V/KV
Overall Dimension L x W x H 		:	350265 x 280 Mm

Technometer

Techinical Specification
Range of RPM			: 	As Required (i.e. 60 - 50,000)
Type of Display		: 	5 Digits, 7 Segment bright red LED
Circuit				: 	Exclusive one chip of micro controller LSI - Circuit
Resolution			: 	0.1 up to  999.9 rpm, 1 above 1000 rpm
Accuracy				: 	± (0.05% 1 digit)
Range Select			: 	Automation

Two Poost Lift

Make	:	Manatec
Techinical Specification
Lifting Capacity			: 	4 Ton
Overall Height 				:	3620 mm
Bay Width				: 	3500 mm
Inside Column				: 	2886 mm
Load Distributer			:	Front : Rear , 2:3
Lifting Time				: 	Less than 45 seconds
Drive Through Clearance	: 	2640 mm
Maximum Lifting Height		:	1800 mm
Maximum Height			:	110 mm
Lifting arm adjustment 		:	Front Rear
Minimum Length			: 	700 mm 927 mm
Maximum Length			: 	900 mm 1317 mm
Power Supply				: 	380V AC, 3 Phase ,50 Hz
Power					: 	3HP

Type Remover

	
Techinical Specification
	Make	: 	Manatec
	Model	: 	TC - XL - 40

• Suitable for car and LCV Tyres
• Wheel Rim Size 10" - 21"
• Pneumatically operated twin cylinder for firm clamping
• Four jaw self centering chuck
• Alloy wheel plastic protector

Vaccum Gauge

Vacuum Gauge is a device for measuring pressures below atmospheric pressure in the receiver of an air pump, in steam condensers and the like.

Techinical Specification 
Model					: 	VG - 150 - GF/CBM/PM
Type  					: 	Dry
Dial Size					: 	1.50
Dial Range				: 	0 to 1 bar
Case					: 	Black ABS/Stainless Steel>
Bourdon Tube				:  	Phosphor Braze 
Movement and Connection 	: 	Brass
Shock Protection 			: 	0.5 mm Restrictor Orifice
Accuracy 					: 	ASME B 40.1 Grade B (+- 3 - 2 - 3%) of span

Valve Lapping Machine (Auto / Manual)

Valve Lapping Machine is a machine in which used to Lapping Process.

Techinical Specification

• Motorized Type
• Single Spindle Type Valve Lapping
• Machine with Center distance of spindles
• Adjustable complete with Electrical.

Valve Grinding Machine

Valve grinding machine is used to renewing the valve face area by grinding on a special grinding machine.

• Valve stem capacity 6 to 25 mm
• Grinding wheel size 5" x ½" x 5/8"
• Butt grinding wheel 4" x ¾" x 5/8"
• Grinding wheel spindle 4000 rpm
• Work head spindle 200 rpm
• Power required 0.5 HP (200/220 V)
• Net weight 100 kg
• Standard Accessories
• Collets ¼" to 9/16" 2 No
• Diamond dresser 1 No
• C-spanner 1 No

Wheel Balencer

Techinical Specification

• Suitable for Car and LCV weheels
• Max. Wheel weight 65 kg.
• Wheel Rim dia 10" - 24"
• Two modes of measurement - Normal & Fine
• Five modes of Alloy wheel functions
• Unit conversion in “gms"/" ounces"
• Position accuracy of ± 1°
• Self calibration
• Automatic distance input
• Self checking on line error display
• Quick change lock nut to ensure fast mounting & removal of wheels.
• Mechanical Brake for Weight addition and wheel mounting
• Automatic start with wheel guard closure
• TFT Monitor /LED digital display